Document Type : Original Article
Authors
1 Assistant professor, Department of Prosthodontics, Faculty of Dentistry, Hamadan University of Medical Sciences, Hamadan, Iran
2 PhD Candidate, Department of Biostatistics, Faculty of Health, Hamadan University of Medical Sciences, Hamadan, Iran
3 Resident of Prosthodontics, Department of Prosthodontics, Faculty of Dentistry, Hamadan University of Medical Sciences, Hamadan, Iran
Abstract
Background: This study sought to assess the effect of glazing and polishing surface treatments on the optical behavior of zirconia-reinforced lithium silicate ceramics thermocycled in different solutions.
Methods:Computer-aided design/computer-aided manufacturing ceramics (VITA Suprinity) were cut into samples (n=104) measuring 1.5x14x10 mm according to the manufacturer’s instructions. Also, the samples were then randomly divided into four groups for immersion in artificial saliva, tea, orange juice and cola. A spectrophotometer was used to assess the color change and changes in L* coordinate against a white and a black background. The translucency parameter and contrast ratio were also calculated. The ∆E and L* values were analyzed using two-way ANOVA test. Student’s t-test was applied to analyze TP and CR.
Results: The interaction effect of the type of solution and type of surface treatment on color change against a white (P=0.008) and black (p <0.001) background was statistically significant. Immersion of ceramic samples in orange juice and cola caused significant changes in TP and CR in the polishing and glazing groups (P < 0.05).
Conclusion:Immersion in orange juice causes clinically perceivable color change in glazed ZLS ceramics. Immersion in cola decreases the translucency of both polished and glazed ZLS ceramics.
Keywords
- Wohlwend A, Strub JR, Schärer P. Metal ceramic and all-porcelain restorations: current considerations. Int J Prosthodont 1989; 2(1):13-26.
- Malament KA, Grossman DG. The cast glass-ceramic restoration. J Prosthet Dent 1987; 57(6):674-83.
- Geller Wl, Kwiatkowski SJ. The Willi's glas crown: a new solution in the dark and shadowed zones of esthetic porcelain restorations. Quintessence Dent Technol 1987; 11(4):233-42.
- Son HJ, Kim WC, Jun SH, Kim YS, Ju SW, Ahn JS. Influence of dentin porcelain thickness on layered all-ceramic restoration color. J Dent 2010; 38(Suppl 2):e71-7.
- Kim HK, Kim SH. Effect of the number of coloring liquid applications on the optical properties of monolithic zirconia. Dent Mater 2014; 30(9):e229-37.
- Culp L, McLaren EA. Lithium disilicate: the restorative material of multiple options. Compend Contin Educ Dent 2010; 31(9):716-25.
- Elsaka SE, Elnaghy AM. Mechanical properties of zirconia reinforced lithium silicate glass-ceramic. Dent Mater 2016; 32(7):908-14.
- Ritter RG. Multifunctional uses of a novel ceramic‐lithium disilicate. J Esthet Restor Dent 2010; 22(5):332-41.
- Denry I, Kelly JR. Emerging ceramic-based materials for dentistry. J Dent Res 2014; 93(12):1235-42.
- Kelly JR, Benetti P. Ceramic materials in dentistry: historical evolution and current practice. Aust Dent J 2011; 56(Suppl 1):84-96.
- Niu E, Agustin M, Douglas RD. Color match of machinable lithium disilicate ceramics: effects of cement color and thickness. J Prosthet Dent 2014; 111(1):42-50.
- Guess PC, Zavanelli RA, Silva NR, Bonfante EA, Coelho PG, Thompson VP. Monolithic CAD/CAM lithium disilicate versus veneered Y-TZP crowns: comparison of failure modes and reliability after fatigue. Int J Prosthodont 2010; 23(5):434-42.
- Pieger S, Salman A, Bidra AS. Clinical outcomes of lithium disilicate single crowns and partial fixed dental prostheses: a systematic review. J Prosthet Dent 2014; 112(1):22-30.
- Schultheis S, Strub JR, Gerds TA, Guess PC. Monolithic and bi-layer CAD/CAM lithium–disilicate versus metal–ceramic fixed dental prostheses: comparison of fracture loads and failure modes after fatigue. Clin Oral Investig 2013; 17(5):1407-13.
- Vichi A, Fonzar RF, Goracci C, Carrabba M, Ferrari M. Surface roughness and gloss of lithium-based glass ceramics after finishing. Dental Materials 2016; 32(1):e81-2.
- Wang F, Takahashi H, Iwasaki N. Translucency of dental ceramics with different thicknesses. J Prosthet Dent 2013; 110(1):14-20.
- de Oliveira AL, Botta AC, Campos JÁ, Garcia PP. Effects of immersion media and repolishing on color stability and superficial morphology of nanofilled composite resin. Microsc Microanal 2014; 20(4):1234-9.
- De Azevedo Cubas GB, Camacho GB, Demarco FF, Pereira-Cenci T. The effect of luting agents and ceramic thickness on the color variation of different ceramics against a chromatic background. Eur J Dent 2011; 5(3):245-52.
- Alp G, Subasi MG, Johnston WM, Yilmaz B. Effect of surface treatments and coffee thermocycling on the color and translucency of CAD-CAM monolithic glass-ceramic. J Prosthet Dent 2018; 120(2):263-8.
- Dos Santos DM, da Silva EV, Watanabe D, Bitencourt SB, Guiotti AM, Goiato MC. Effect of different acidic solutions on the optical behavior of lithium disilicate ceramics. J Prosthet Dent 2017; 118(3):430-6.
- Turssi CP, Hara AT, de Magalhães CS, Serra MC, Rodrigues AL Jr. Influence of storage regime prior to abrasion on surface topography of restorative materials. J Biomed Mater Res B Appl Biomater 2003; 65(2):227-32.
- Ren YF, Feng L, Serban D, Malmstrom HS. Effects of common beverage colorants on color stability of dental composite resins: the utility of a thermocycling stain challenge model in vitro. J Dent 2012; 40(Suppl 1) e48-e56.
- Faverani LP, Barão VA, Ramalho‐Ferreira G, Ferreira MB, Garcia‐Júnior IR, Assunção WG. Effect of bleaching agents and soft drink on titanium surface topography. J Biomed Mater Res B Appl Biomater 2014; 102(1):22-30.
- Lee SH, Lee YK, Lim BS. Influence of thermocycling on the optical properties of laboratory resin composites and an all-ceramic material. J Mater Sci Mater Med 2004; 15(11):1221-26.
- Lehmann KM, Igiel C, Schmidtmann I, Scheller H. Four color-measuring devices compared with a spectrophotometric reference system. J Dent 2010; 38(Supple 2):e65-70.
- Gregorius WC, Kattadiyil MT, Goodacre CJ, Roggenkamp CL, Powers JM, Paravina RD. Effects of ageing and staining on color of acrylic resin denture teeth. J Dent 2012; 40(Supple 2):e47-54.
- Acar O, Yilmaz B, Altintas SH, Chandrasekaran I, Johnston WM. Color stainability of CAD/CAM and nanocomposite resin materials. J Prosthet Dent 2016; 115(1):71-5.
- Nogueira AD1, Della Bona A. The effect of a coupling medium on color and translucency of CAD–CAM ceramics. J Dent 2013; 41(Supple 3):e18-23.
- Hipólito AC, Barão VA, Faverani LP, Ferreira MB, Assunção WG. Color degradation of acrylic resin denture teeth as a function of liquid diet: ultraviolet-visible reflection analysis. J Biomed Opt 2013; 18(10):105005.
- Ardu S, Braut V, Gutemberg D, Krejci I, Dietschi D, Feilzer AJ. A long-term laboratory test on staining susceptibility of esthetic composite resin materials. Quintessence Int 2010; 41(8):695-702.
- Bagis B, Turgut S. Optical properties of current ceramics systems for laminate veneers. J Dent 2013; 41(Suppl 3):e24-30.
- Fontes ST, Fernández MR, de Moura CM, Meireles SS. Color stability of a nanofill composite: effect of different immersion media. J Appl Oral Sci 2009; 17(5):388-91.
- Catelan A, Briso AL, Sundfeld RH, Goiato MC, dos Santos PH. Color stability of sealed composite resin restorative materials after ultraviolet artificial aging and immersion in staining solutions. J Prosthet Dent 2011; 105(4):236-41.
- Bagheri R, Burrow MF, Tyas M. Influence of food-simulating solutions and surface finish on susceptibility to staining of aesthetic restorative materials. J Dent 2005; 33(5):389-98.
- Ccahuana VZ, Ozcan M, Mesquita AM, Nishioka RS, Kimpara ET, Bottino MA. Surface degradation of glass ceramics after exposure to acidulated phosphate fluoride. J Appl Oral Sci 2010; 18(2):155-65.
- Ryan EA, Tam LE, McComb D. Comparative translucency of esthetic composite resin restorative materials. J Can Dent Assoc 2010; 76:84.
- Johnston WM, Ma T, Kienle BH. Translucency parameter of colorants for maxillofacial prostheses. Int J Prosthodont 1995; 8(1):79-86.
- Ramos Nde C, Campos TM, Paz IS, Machado JP, Bottino MA, Cesar PF, et al. Microstructure characterization and SCG of newly engineered dental ceramics. Dent Mater 2016; 32(7):870-8.
- Belli R, Wendler M, de Ligny D, Cicconi MR, Petschelt A, Peterlik H, et al. Chairside CAD/CAM materials. Part 1: measurement of elastic constants and microstructural characterization. Dent Mater 2017; 33(1):84-98.
- Tan BL, Yap AU, Ma HN, Chew J, Tan WJ. Effect of beverages on color and translucency of new tooth-colored restoratives. Oper Dent 2015; 40(2):E56-65.